2. Install the available Proxmox ISO on the server
3. Start the server from the ISO file by selecting the virtual drive in the startup options.
4. Proxmox EULA will be displayed. Accept telegram data this by clicking "I agree":
5. A summary of the Proxmox installer will be displayed. Click "Options" at the bottom of the page:
6. Select the RAID level for Proxmox. To mirror the data on both drives, select zfs (RAID1), and then click Next to continue with the installation:
7. Enter the location of your server and select the time zone to be used, then click "Next" to proceed to the next step:
8. Enter a strong administrator password of at least eight characters, your confirmation and contact email address. Proxmox will send important notifications to this email address, so please make sure it is valid. When you're done, click "Next":
9. Set up a management network. This will be the network interface where the web interface and the Proxmox API will be available. It is recommended that you set it up on your primary email address.