ASUS RT-AX57 Go has holes for wall mounting
The ASUS RT-AX57 Go is powered by a MediaTek MT7981B chipset running at 1.3GHz, 512MB of RAM, and 128MB of firmware storage. This chipset has a new design with five internal antennas for improved wireless reception. The company uses one more 5GHz antenna than the traditional AX3000 wireless router, which boosts the wireless signal and increases its strength in the 5GHz frequency band. This should result in fewer dead zones in the 5GHz band and improved Wi-Fi performance. The router uses 2×2 MU-MIMO for wireless data transmission on both bands. This means the ASUS RT-AX57 Go offers two spatial streams for sending and receiving wireless data on one frequency 2.4GHz and 5GHz. The total theoretical throughput is 574 Mbps on the 2.4 GHz band and 2402 Mbps on the 5 GHz band when using the Wi-Fi 6 standard. Although the router can use older wireless standards such as Wi-Fi 4 on the 2.4 GHz band and Wi-Fi 5 on the 5 GHz band, the maximum throughput will be lower.
ASUS RT-AX57 Go can use 160MHz channel bandwidth on the 5GHz band when using Wi-Fi 6 and WPA3 password encryption.
Overall, I am pleased with the hardware configuration of this afghanistan telegram data travel router. It is relatively powerful, with a lot of ports and features, which I will discuss in more detail later in this review. For more detailed technical information about this product and its specifications, visit its official web page: ASUS RT-AX57 Go .
Setting up and using ASUS RT-AX57 Go
The ASUS RT-AX57 Go is designed for use while traveling. As a result, it is not only small and lightweight, but also comes with a nice travel bag. You put it inside, close the bag, and put it in your luggage for protection. When you arrive at your destination, connect it to the Internet using your smartphone, a network cable, or a public Wi-Fi network available in your area, and then start setting it up.